Cosmo Pedestal Attachment Instructions

Hardware:
8 – #10 x 1 1/2” screws (4 per side) if fixed size table
12 – #10 x 1 1/2” screws (6 per side) if extension table
4 – Levelers (2 per side)

1. Place table face down on a clean flat surface.

2. Align top plate on 1/2 of base with holes in cleats or slides.

3. Insert screw into each hole and and drive in with air driver or phillips head screw driver.

4. Repeat for opposite sides.

5. Insert levelers into the bottom of base (2 sides).

6. Carefully turn table upright and place in position. Adjust levelers as needed.