Emerson Trestle Attachment Instructions
Begin with the table top laid top-down.
Place one base side top-down on one of the plates, with the larger hole facing outwards.
Secure the base to the plate using one washer and one bolt included in the hardware pack.
Put one stretcher into place by sliding the bolt through the top hole, and the wooden dowel in the bottom hole.
Secure the bolt through the other side of the base using one washer and one nut. Repeat 4 & 5 for the other stretcher.
Repeat steps 2 through 5 for the other side. Cover the large holes with buttons included in the hardware pack